Intex MARINER 4 BOAT SET 2012 - Manual (Page 4)

98PO
(98PO) "NMMA" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 11/08/2011
SAVE THESE INSTRUCTIONS
Page 4
Manufacturer’s Recommendation
The total number of persons, motor power and total weight shall not exceed the limits printed on the boat.
Please refer to the boat's hull label for the actual values of your boat. See Table A.
BOAT LABEL FORMAT
+ +
CHALLENGER 3a
CHALLENGER 4a
SEAHAWK 2
SEAHAWK 3
SEAHAWK 4
EXCURSION 2
EXCURSION 3
EXCURSION 4
EXCURSION 5
SEAHAWK II
MARINER 4
68369
68371
68346
68349
68350
68318
68319
68324
68325
68377
68376
II
II
II
II
II
II
II
II
II
II
II
2.95
3.51
2.36
2.95
3.51
2.41
2.62
3.15
3.66
2.97
3.28
1.37
1.45
1.14
1.37
1.45
1.45
1.57
1.65
1.68
1.27
1.45
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2
3
255
340
200
300
400
200
300
400
455
300
400
3
4
2
3
4
2
3
4
5
3
4
9
13
6
11
17
13
15
19
22
16
32
0.035 (0.5)
0.035 (0.5)
0.069 (1.00)
0.069 (1.00)
0.069 (1.00)
0.069 (1.00)
0.069 (1.00)
0.069 (1.00)
0.069 (1.00)
0.080 (1.14)
0.080 (1.14)
MODEL TYPE
Unladen Craft Weight
m m HP Kg Kg bar (psi)
Lh Wh
TABLE A
ISO 6185 PART 1 TYPE
CATEGORY D
Do not overinflate or use high pressure air
compressor to inflate.
Adults should inflate the chambers with cold air in
numbered sequence.
Use the enclosed ruler to check while inflating.
Nicht zu stark aufblasen und keinen Kompressor
zum Aufblasen verwenden.
Erwachsene sollten die kammern in der
angegebenen Reihenfolge mit kalter luft aufblasen.
Verwenden Sie das belgefügte Meßgerät um die
korrekte Füllung zu überprüfen.
Ne pas surgonfler. Ne pas utiliser de compresseur
pour le gonflage.
Le gonflage doit être effectué par un adulte avec de
l'air froid en suivant les étapes suivantes.
Utiliser la règle jointe pour ajuster le gonglage de la
chambre à air principale.
MAXIMUM CAPACITIES
MAXIMUM-KAPAZITÃT
CAPACITÉS MAXIMUM
MAXIMUM POWER
MAXIMUM MOTORKRAFT
PUISSANCE MAXIMUM
PERSONS
PERSONEN
PERSONNES
MANUFACTURER
HERSTELLER
FABRICANT
MODEL
MODELL
MODÈLE
RECOMMENDED WORKING PRESSURE FOR EACH CHAMBER
EMPFOHLENE ARBEITENDE DRUCK FÜR JEDE LUFTKAMMER
RECOMMANDÉ FONCTIONNEL PRESSION POUR CHAQUE CHAMBRE À AIR
CN-XEE
________
XEE
________
BY INTEX ®
LOAD CAPACITY
BASIC FLOTATION
___Kg ( ___ Lbs) MAX.
National Marine Manufacturers Association
____________________
= ___ bar ( ___ psi)
CHINA
3
5
6
7
8
9
2
1
10
MAXIMUM CAPACITIES
PERSONS OR ____kg (___Lbs)
____ ____ POUNDS, PERSONS, GEAR, ENGINE
DESIGN COMPLIANCE WITH NMMA REQUIREMENTS BELOW IS VERIFIED.
MFGR. RESPONSIBLE FOR PRODUCTION CONTROL
+ + = ___ Kg ( ___ Lbs)
___kW (___HP) / ___Kg (___Lbs)
= ___
11
4
ISO-6185 boat design category (certain models). CE mark (for Europe only) (certain models).
Europe hull identification number (HIN). USA hull identification number (HIN).
Manufacturer’s recommended maximum load capacity. Maximum person’s capacity.
Manufacturer’s name and country of origin. Model name and number.
Manufacturer’s recommended working pressure.
NMMA (for USA only) certification means that the boat, sold in the United States, has been judged by
the National Marine Manufacture’s Association to be in compliance with the U.S. Coast Guard
Regulations and American Boat and Yacht Council (ABYC) standards and recommended practices.
Maximum motor power and motor weight.
9
8 7
6
5
4 3
2 1
10
11