Intex Volleyball Set For Circular Metal Frame Pool 2011 - Manual (Page 3)

(51PO) ENGLISH POOL VOLLEYBALL SET MANUAL (FOR ROUND METAL FRAME POOL) SIZE: 4.875” X 7.25” PANTONE 295U 05/22/2008
51PO
SAVE THESE INSTRUCTIONS
Page 6
(51PO) ENGLISH POOL VOLLEYBALL SET MANUAL (FOR ROUND METAL FRAME POOL) SIZE: 4.875” X 7.25” PANTONE 295U 05/22/2008
51PO
SAVE THESE INSTRUCTIONS
Page 5
SS
EE
TT
--UU
PP
II
NN
SS
TT
RR
UU
CC
TT
IIOO
NN
SS
POOL VOLLEYBALL SET UP (continued)
SS
EE
TT
--UU
PP
II
NN
SS
TT
RR
UU
CC
TT
IIOO
NN
SS
POOL VOLLEYBALL SET UP
IMPORTANT: Before proceeding to the next step ensure the pool is
fully set up and filled with water following the pool owner's manual.
1. Fully open the two dovetail
screws (3) and attach a pole
bracket (5) to a circular metal frame
pool "T JOINT". Make sure the pole
bracket (5) is securely attached to
the "T JOINT".
2. Secure the pole bracket (5) with two
X-long pins (2) and tighten the two
dovetail screws back using your
fingers only. NOTE: Do not over
tighten or use tool such as pliers.
3. Insert the assembled volleyball pole
into the pole bracket (5). Secure the
pole to the bracket with long pins (1).
2
1
2
1
3
2
5
1
3
1
2
5 3
1
2
3
4. Attach two volleyball net
fasteners (8) to the volleyball pole.
Ensure the volleyball net
fasteners (8) are facing outward.
5. Locate the opposite "T JOINT"
of the circular metal frame pool
and attach the second pole
bracket (5) to the "T JOINT", repeat
steps #1 to #4.
6. Attach one side of the Volleyball
Net (9) starting from the top
Volleyball Net Fastener (8) and then
the bottom fastener. Loop the rope
around the fastener (8) several
times and secure the end of the
rope to the two notches in the
fastener. NOTE: Adjust the length of
the rope to be looped around the
fasteners depend ing on the size of
the pool. Repeat this procedure
for the other pole.
Frame pool
“T” joint
6
6
8
4
5
8
2
1
6
8