Intex 18 FT X 52 IN ULTRA FRAME POOL 2013 - Manual (Page 11)

(118PO) ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/20/2012
118
PO
SAVE THESE INSTRUCTIONS
Page 11
English
STORAGE
WINTER PREPARATIONS
Winterizing your Above Ground Pool
After usage, you can easily empty and store away your pool in a safe
place. You must drain, disassemble and properly store the pool
when the temperature drops below 41 degrees Fahrenheit (5 degrees
Celsius) to prevent ice damage to the pool and related components.
Ice damage can result in sudden liner failure or pool collapse. Also
see the section “How To Drain Your Pool’’.
Should temperatures in your area not drop below 41 degrees
Fahrenheit (5 degrees Celsius), and you choose to leave your pool out,
prepare it as follows:
1. Clean the pool water thoroughly. If the type is an Easy Set Pool or an
Oval Frame Pool, make sure that the top ring is properly inflated).
2. Remove the skimmer (if applicable) or any accessories attached to the
threaded strainer connector. Replace strainer grid if necessary. Be sure
all accessories parts are clean and completely dry before storage.
3. Close the Inlet and Outlet Plunger Valve.
4. Remove the ladder (if applicable) and store in a safe place. Be sure the
ladder is completely dry before storage.
5. Remove the hoses that connect the pump and filter to the pool.
6. Add the appropriate chemicals for the winter period. Consult your local
pool dealer as to which chemicals you should use and how to use them.
This can vary greatly by region.
7. Cover pool with Intex Pool Cover. IMPORTANT: INTEX POOL COVER
IS NOT A SAFETY COVER.
8. Clean and drain the pump, filter housing and hoses. Remove and discard
the old filter cartridge. Keep a spare cartridge for the next season).
9. Bring pump and filter parts indoors and store in a safe and dry area,
preferably between 32 degrees Fahrenheit (0 degrees Celsius) and 104
degrees Fahrenheit (40 degrees Celsius).