Cannondale Bicycles User Manual
Page 51
47
clamping force is controlled by the tension adjusting nut. Turning the
tension adjusting nut clockwise while keeping the cam lever from rotating
increases clamping force
; turning it counterclockwise while keeping
the cam lever from rotating
reduces clamping force
. Less than half
a turn of the tension adjusting nut can make the difference between safe
clamping force and unsafe clamping force.
CAUTION: The full force of the cam action is needed to clamp the
seatpost securely. Holding the nut with one hand and turning the
lever like a wing nut with the other hand until everything is as tight
as you can get it
will not clamp the seatpost safely.
CAUTION: If you can fully close the quick release
without wrapping
your fingers around a frame tube for leverage, and the lever
does not
leave a clear imprint in the palm of your hand,
the tension is insuffi-
cient. Open the lever; turn the tension adjusting nut clockwise a
quarter turn; then try again.
!
!
2000 owner's manual 10/27/99 10/27/99 11:16 AM Page 47