Cisco TD 92322GB - Manual (Page 12)

TD 92322GB
2007-06-26/ Ver. D
Installation and Operation Manual
Integrated Message Server, IMS/IP-WiFi
9
bus, this parameter has to be set manually. See System Planning, On-site Paging
System, TD 90202GB for more information.
• Send module status from A-bus to Unite
The IMS/IP can send module status received from the A-bus to the Unite system. This
also means that if IMS/IP is connected as slave it will subscribe for module status from
the central unit in system 900.
• Call diversion display text
Text specified here is added to the display message at a call diversion. The originating
Call ID can be included by writing a “%” character where the Call ID shall be inserted
in the text.
3.2.2 Message Distribution
The 900 Interface has distribution lists that define where incoming data from the Pocket
Units in the System 900 and the System 900 modules should be sent. The receivers are
addressed in the same way as for the DECT Interface that is described in Installation
Guide, ELISE2, TD 92232GB. The following information is supported:
• Alarm
- Personal alarms with location information from Pocket Units.
• Mobile Data
- Data sent from Pocket Units.
• Input activity
- An input on an Alarm Module has been activated.
• Location
- Special Location
1
information from Pocket Units.
• Availability Info
- Includes absence information, i.e. if a Pocket Unit is placed in Charging/Storage
Rack.
Pagings that are received from the A-bus will be transmitted to the destination that
corresponds to the address in the UNS.
3.3 Other Parameters
3.3.1 Status log
The Status log messages have their own distribution list that can be reached from
System Setup > Other > Logging > Status log. The status log messages include
information about errors in applications or modules, for example module status from Fixed
Units on the A-bus. For information about how to address the receiver of the Status log
messages, see Installation Guide, ELISE2, TD 92232GB.
3.3.2 System Activity log
The System Activity log messages have their own distribution list that can be reached from
System Setup > Other > Logging> System Activity log. For information of system activity
log messages, see Function Description, Activity Logging in Unite, TD 92341GB. For
information about how to address the receiver of the System Activity log messages, see
Installation and Operation Manual, Enhanced System Services, ESS, TD 92253GB.
1.The Special Location can be sent every time a pocket unit gets a new location from a locator in the system. This requires
configuration both in the handset and in the locator. Also called “Immediate Alarm Transmission”.