COBY electronic KTF-DVD 1093 - Manual (Page 7)

•
DVD
.7.
Mounting
Under-Cabinet Mounting
Mounting Base
>
>
>
>
Min. 2.0 mm
Max. 25.0 mm
<
<
Choose an appropriate mounting location underneath a cabinet or shelf.
Choose an appropritate mounting location underneath a cabinet or shelf. Close proximity to an electrical
outlet, a TV antenna or cable connection and a telephone jack will facilitate a neat, easy installation.
Do not mount the product above a range or oven.
Be sure that the location chosen will provide adequate access to the electrical connection on the rear of
the unit before continuing.
Under-cabinet Mounting
1. Upon opening the final package, you will find a position reference template that tells the standard
position you have to drive through when mounting. Tape the template in place onto the cabinet surface
and drill four screw-holes accordingly through the cabinet base.
2. Position the product and mount it in place using the supplied screws. Do not over tighten.
3. Connect the cables. Route the wires safely away from the heat and moisture sources and secure them
in place.
NOTE:
1. The template is just for the position reference when mounting, please don’t affix it to the mounting
surface.
2. To ensure the product safety, it is recommended that the minimum thickness of your cabinet
base should be 2.0 mm and the maximum thinckness should be 25.0 mm.
3. Take care when installing it. It may cause damage or serious injury should it fall from its mountings.