CLIFFORD G5 11CX 562C - Manual (Page 12)

8
© 2004 Directed Electronics, Inc.
You can prevent your system from automatically activating the
Failsafe ® Starter Kill by using Valet ® Mode. This is very useful when
washing the vehicle or having it serviced. In Valet ® Mode, the
starter kill cannot be activated, even with the transmitter, but all
convenience functions will continue to work normally.
To enter or exit Valet ® Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet ®
switch within 10 seconds.
The status LED will light steadily if you are entering Valet ® Mode
and will turn off if you are exiting Valet ® Mode.
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter. Just press
for 1.5 seconds to enter Panic Mode. In Panic Mode, the horn
will honk and the parking lights (optional) will flash for 30 sec-
onds. To stop Panic Mode at any time, press , or on the
transmitter.
NOTE: In order for Panic Mode to be effective, the vehicle’s horn as well
as the vehicle's parking lights must be connected.
Panic Mode
DRW-35
Valet ® Mode