CLIFFORD G5 11CX 562C User Manual

Page 11

2004 Directed Electronics, Inc.

Pressing

for one second disarms the system. The horn will honk

twice and the parking lights (optional) will flash twice to confirm

disarming of the system. The optional Failsafe

Starter Kill will be

deactivated. The status LED will turn off, unless the system is pro-

grammed for Passive Mode. In Passive Mode, the status LED will

flash rapidly when the system is disarmed. This indicates that the

system will re-engage the starter kill in 30 seconds unless the igni-

tion is turned on.

If your remote transmitter is lost or damaged, you can manually

override the starter kill. To do this, you must have the vehicle's

ignition key and know where the Valet

switch is located. Be sure

to check with the installer for the location of the Valet

switch.

To override the starter kill, turn

the ignition on and press the

Valet

switch within 10 seconds.

The status LED will stop flashing

and the vehicle should start. If it does not start,

you may have waited too long; turn the ignition off and repeat the

process.

LOCATION OF VALET

SWITCH_____________________________

DRW-35

Disabling the Starter Kill Without a Transmitter

Disarming