Cub Cadet Zero-Turn Commercial Riding Mower Professional Turf Equipment - Manual (Page 9)

9
SPECIFICATIONS
GENERAL INFO.
Controls:
Engine ignition and start switch; throttle; left and right steering
levers; electric blade clutch switch; parking brake; mower deck lift
Parking Brake: Mechanical linkage attached to the brake handle and drum
brakes
Seat: Fully adjustable Suspension Seat-fore/aft, seatback, armrests
and operator weight adjustments
Frame: 2" Steel square tube and plate, all welded construction
Instrumentation: Hourmeter; Low Voltage, Low Oil Pressure, High Coolant Tem-
perature, and Glo-Plug activation indicator lights; (tachometer
optional)
Front Caster Wheels: 13 x 6.50 x 6
Drive Wheels: 60" & 72” deck, 24x12 - 12
Tire Pressure: 10-12 psi Rear, 20-25 psi front caster
Fuel Tank: Two 6.5 gallon w/ shutoff valves
Ground Speed: 0-12 + MPH forward. 0-5 MPH reverse
Net Weight: 1460 lbs. w/60" deck, & 1540 lbs. w/72” deck
Operator Protective
Device: Roll Over Protective Structure, and Retractable Seat Belts
ENGINE INFO.
Engine:
28.2HP, InDirect Injection, Caterpillar diesel, 1.131 liters
Type: Horizontal Crankshaft, 3 cylinder in-line, 23:1 compression
Air Cleaner: Dual Element, Canister Type
Lube System: Pressurized with oil filter Shell Rimula 15W40-4.3 quarts
Hydraulic System: 3 quart capacity, One quart filter Shell Rimula 15W40, CI-4 plus
Coolant: Shell Dex-Cool ELA 50/50 antifreeze
Starter: 12-volt electric, cold limit -20C (-4F)
Blade Brake Clutch: Electric
TRACTION DRIVE INFO.
Traction Drive:
Variable-speed hydrostatic pumps and hydraulic wheel motors for
each drive wheel
CUTTER DECK INFO.
Cutter Deck;Drive:
60” & 72” Belt Driven
Deck Lift: Foot lever w/pin lock for height adjustment
Cutting Height: 1-1/2" to 5"
No. of Blades 3, attach to spindle with 3/4” bolts
Deck Spindles: 1-1/4” diameter tapered-roller bearings, aluminum housing