Т³гж 16, Recording mode, Play mode – Curtis DVD2100 User Manual

Page 16

Recording Mode

Introduction

There are various external signal inputs in the unit, including S-Video, composite video, TV tuning , DV input

and stereo audio input. You can select any group of audio and video signals from these inputs for recording.

The recording discs of the unit include DVD+RW and DVD+R. There are four available recording modes of

different quality, including SLP (6 hours), EP (4 hours), SP (2 hours) and HQ (1 hour).

The unit has a function of timer recording. You can set up a recording schedule in advance. The unit will record

the programs that you select automatically. If the unit is connected with a DV camera, you can also conduct a long

time recording to monitor a certain location in an automatic and intelligent way.

Entering the recording mode and menu description

To enter the recording mode, take the following steps:

1. In the Non-rewritable Disc mode, press the

SOURCE

button to enter the Monitoring Mode.

The Monitoring Mode can be regarded as a sub-mode of the Recording Mode.

2.The system will automatically enter the Recording Mode when the setup time is reached.

For details about timer recording, see

Timer Recording

for reference.

3.In the Recording Mode, press the

DISPLAY

button to show or hide the recording control bar menu.

The meanings of various options in the recording control bar menu are as follows.

1) The disk format must be DVD+RW or DVD+R.

2) Mode.

3) Recording Input Source.

4) Recording Quality.

5) REC TO: DVD+VIDEO.

6) Recording Process Control (STOP, PAUSE and RECORD).

7) Number of Recorded Titles.

8) Number of Recorded Chapters.

9) Recordable Time Left.

Record (DVD+R)

Mode New Title

Source DV

Quality SP

REC TO DVD+VIDEO

TRICK Record

Title 04/04

Chapter 02

Time 0:06:02/1:57:18

The general steps for recording external signals are as follows.

1. Complete the system connection.

2. Select the signal source to be recorded.

3. Enter the recording control bar menu.

4. Select the recording quality.

5. Start recording.

6. Stop recording

General Steps

DVD

VCD

Play Mode

The Use of the

GOTO

Button

1. In the playing status, press the

GOTO

button to cycle through various options in the play control bar menu.

With the above-mentioned operations, you can use the remote controller to enter the corresponding value and skip

to the corresponding location directly.

The following is an example of DVD playing. The operation of VCD playing is similar to this case.

For CD and MP3 discs, it is no use pressing the

GOTO

button.

CHAPTER:--

TITLE:--

TIME:--:--:--

TR-TIME:--:--:--

Audio Selection

Some DVD discs may have more than one OSD language. You may select one of them as the output.

1. In the play control bar menu, select the Audio

item.

There are some digits under the icon. The number on the

right is the total number of OSD languages; the one on the

left is the number of the current mode.

2.Press the

SELECT

button, use the or button

to select the

Audio

item, and press the

SELECT

button of the remote controller to confirm.

3.This function enables you to switch between different

languages by pressing the

AUDIO

button directly.

DVD

MODE Normal

TRICK Play

TITLE 01/01

CHAPTER 02/14

AUDIO 01/03-OTH

SUBTITLE 01/01-OTH

ANGLE 01/01

T- TIME 00:02:48-00:51:25

This function is available for CD, VCD and MP3 discs.

1.In the play control bar menu, press the or button

to select the

Audio

item, press the

SELECT

button to confirm and enter the input mode.

2.Use the or button to select

Stereo

Right

or Left, and press the

SELECT

button to confirm.

3.This function enables you to switch between different

channels by pressing the

AUDIO

button directly

Audio Channel Selection

VCD

MODE: Normal

TRICK: Play

TRACK: 01/01

AUDIO: Stereo

PBC: ON

TR-TIME: 00:02:48-00:51:25

D-TIME:--