Nergy, Aver, Odes – Compaq MV 740 User Manual
Page 12
10
E
NERGY
S
AVER
M
ODES
Your monitor is designed to meet strict EPA (Environmental Protection Agency) Energy Star
requirements for reduced power consumption and to comply with the VESA Standard Display Power
Management Signal. Using a combination of hardware and software functions, this energy-saving
feature allows your computer to control your monitor’s power consumption and reduce your monitor’s
power state when not in use.
NOTE: Power consumption does not include the speaker power.
IMPORTANT: Your monitor’s energy saver feature works only when your monitor is connected to a computer
that also has energy saver features.
The following table describes your monitor energy saver levels in each of four power states:
Power Management States
State
LED color
Power
Consumption
Description
ON
Green
<100 watts
Normal operation
STANDBY/
SUSPEND
Yellow
<15 watts
Monitor screen is blank. High voltage is off. Heater
voltage is reduced. Full power mode returns quickly
(approximately 4 seconds).
SLEEP
Amber
<5 watts
Monitor screen is blank. High voltage is off. Heater
voltage is off. There is a brief warm-up period before
returning to full power mode (approximately 15
seconds).
The energy saver utility, with its energy saver features, is available with the Microsoft® Windows®
operating system, and some features are available in DOS. Refer to your computer’s user guide for
instructions on setting energy saver features (also referred to as power management features).