Chief Manufacturing PL-1 - Manual (Page 6)

Installation Instructions PL-1
6
INSTALLATION (CONT’D)
10. Route the cables (Figure 5).
11. Slide PL-1 halves together (see
Figure 6).
12. Insert key.
13. To operate the lock, do the following:
a. To lock the PL-1, turn the key (supplied) 90°
clockwise.
b. To unlock the PL-1, turn the key (supplied) 90°
counterclockwise.
14. Remove key.
Figure 4. Install Projector
Figure 5. Route Cables
Figure 6. Lock Unit
Cable Route Access Side Cable
Route Access
Side Cable
Route Access
Lock (CW)
90°
Unlock (CCW)