Chief Manufacturing PL-1 - Manual (Page 3)

Installation Instructions PL-1
3
CONTENTS
DIMENSIONAL DRAWING ............................................... 2
TOOLS REQUIRED FOR INSTALLATION ....................... 3
PARTS LIST ...................................................................... 3
INSPECT INSTALLATION LOCATION ............................. 3
INSTALLATION ................................................................. 4
TOOLS REQUIRED FOR
INSTALLATION
• Allen
wrench set
NOTE: Other tools may be required depending on your
method of installation.
PARTS LIST
Prior to assembly, unpack the carton completely. Verify
contents listed in Table 1.
Read installation instructions completely. If you are
missing any of the listed parts, contact Customer Service
at: 1-800/582-6480.
Table 1. Parts List
REF DESCRIPTION QTY
10 PL-1 Projector Lock 1
20 Screws 4
30 Spacers 4
PL1A* Key C346A 2
PL1B* Key C346B 2
PL1C* Key C346C 2
*The PL-1 is shipped with two matching keys: PL1A, or
PL1B, or PL1C. To ensure security, the PL-1 is shipped
with one of three different keys.
INSPECT INSTALLATION
LOCATION
Because of the wide variety of possible mounting
situations, Chief Manufacturing only provides general
guidelines for the typical pole-mounted installation.
Study the following information carefully, and make
adjustments as necessary to fit your specific installation.
WARNING
There is a potential for personal injury or equipment
damage if the projector is not adequately mounted.
Be aware of the overall weight of the equipment,
including weight of projector and all attaching
hardware.
OR
OR