Programming/ system aspects, Play, 1 . 1 1 l – Philips CD163 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PLAY
PROGRAMMING/
SYSTEM ASPECTS
m
3
(Q
5T
3"
ADJUSTING THE SOUND LEVEL (-VOLUME +)
(for CD165 only)_________________________________
CAUTION:
- Usethe-VOLUME+keys (on the remote control)
only if the player is connected to an amplifier or
HiFi system without its own remote control.
Note:
-
The setting chosen with -VOLUME+ will be
cancelled when the player is switched off.
•
Hold -VOLUME down.
-
VOL lights up: the output signal from the player
will now decrease gradually.
- The successive steps are shown on the display.
•
Release the key as soon as the required sound
level is obtained.
•
Hold VOLUME + down.
-
VOL lightsup.theoutputsignalwill nowincrease
again gradually to the maximum level.
- The successive steps are shown on the display.
•
Release the key as soon as the required sound
level is obtained.
PLAYING THE PROGRAMME (PLAY)________________
•
Press PLAY.
Play starts with the first numberoftheprogramme.
All keys (except program) can be used during pro
grammed play.
Search fora particular passage is only possible within
the track being played.
REVIEWING OF TRACKS IN A PROGRAM
•
•
If you have stored a programme, the sequence
of the programme can be reviewed by pressing
1
« or key. This can only function when the CD
player is not playing (in stop mode).
ERASING A PROGRAM
(STOP/CP or OPEN-CLOSE)_______________________
•
Press STOP/CP twice or, if the CD has already
stopped, just once; you can also press
OPEN-CLOSE straight away.
-
The programme has now been erased.
INTERFERENCE TO TUNER_______________________
NOTE!
-
To avoid unnecessary interference, always switch
off the CD player when you are in Tuner mode.
STORING A PROGRAMME (PROGRAM and w w)
You can store 30 tracks from each CD in any required sequence in a program.
FULL lights up if you exceed the maximum of 30 tracks.
r i l l I
I
/_//_/_
In STOP mode, press PROGRAM to open the memory.
PROGR lights up and IJiMctJstarts flashing.
Press
1
« or
until the desired track number appears under TRACK.
Press PROGRAM again.
The track number has now been stored in the player’s memory.
Select the other track numbers required and store each track by pressing PROGRAM.
The number of tracks and the playing time of your programme will be shown under TFIACK andTOTAL
TIME.
TMCK
TMCKVME
PROSft 1
1 . 1 1
L
1 • / _ _ /
Press STOP/CLEAR to stop programming.