Cary Audio Design 7.125 - Manual (Page 11)

CONTROLS AND DISPLAYS
9
FRONT PANEL
POWER BUTTON

The Power Button performs no function when the amplifier is powered off with the
rear panel Master Power Switch.

When the rear panel Master Power Switch is powered on, the Model 7.125 is in
Standby mode. Pressing the Power Button when the rear panel master panel switch is
powered on will activate the power amplifier. When the Model 7.125 is activated, the
front panel display lights blue. The display can then be controlled by a rear panel
dimmer switch (see Rear Panel) in three modes – High, Off and Low.
Note: When the status of the Model 7.125 changes, relay checks may be audible. This
is normal operation.