Philips AQ6546 - Manual (Page 7)

Cassette player * General Information
PLAYING BACK CASSETTES
Set TAPE/RADIO to TAPE.
Connect the headphones to ii.
Open the cassette holder and insert a cassette
with the open part facing the buttons.
Set METAL-Cr02/N0RMAL selector to:
METAL-Cr02 for CHROME (lEC II) or METAL
TVi paecattoc
NORMAL for NORMAL (lEC I) cassettes
To start playback, press ◄ ►.
During playback, you can reverse the tape
direction using ◄ DIR ►.
Adjust the sound with VOLUME and GRAPHIC
EOUALIZER.
To stop, press ■ and the set is switched off.
Fast Vifinding: Press or To stop press ■.
AUTO REVERSE
The tape direction will be automatically reversed
whenever the player reaches the end of the tape.
So the cassette is played continiously, until you
press ■ (or until the batteries are exhausted).
ACCESSORIES (included)
• Stereo headphones or in-ear phones
• Beit clip
USE YOUR HEAD WHEN USING HEADPHONES * •
Hearing safety: Do not play your headphones at a
high volume. Hearing experts advise that
continuous use at high volume can permanently
damage hearing.
Traffic safety: Do not use headphones while
driving a vehicle. It may create a traffic hazard and it
is illegal in many countries. Even if your
headphones are an open-air type designed to let
you hear outside sounds, do not turn up the volume
so high that you cannot hear what is going on
around you.
MAINTENANCE____________________________
• Clean the magnetic head after every 50 hours of
operation or, on average, once a month by
playing through a cleaning cassette.
• Do not expose the set and cassettes to rain,
moisture, sand, or to excessive heat from e.g.
heating equipment or in motor cars parked in the
sun.
• Do not use cleaning agents containing alcohol,
spirits, ammonia or abrasives.