Philips RD 1220/18 - Manual (Page 3)

English
( g |)
RADIO
Radio reception
• Set the TAPE/CD/RADIO selector 6 to
RADIO. The POWER, indicator 5 lights up.
• Adjust the sound with the controls
VOLUME 4, and TONE 7.
• Select the wave band using BAND
selector 11.
•Tune to a radio station using TUNING knob 9.
(LWnot on all versions)
-For FM, pull out the telescopic aerial. To
improve FM-reception, incline and turn the
aerial. Reduce its length if the FM-signal is
too strong (very close to a transmitter).
-For AM/MW and LW (Medium and Long
Wave), the set is provided with a built-in
aerial, so there is no need to use the
telescopic aerial. The aerial can be directed
by turning the whole set.
•When BAND selector 11 is in position FM
and the FM STEREO 10 indicator lights up,
you are receiving a FM-stereo transmitter.
A disturbing noise, due to a weak FM-stereo
signal, can be suppressed by setting the
FM-MODE selector 1 to MONO.
The FM STEREO 10 indicator will then go out
and you will hear (and record) the FM
programme in mono.
•To switch off the set, place TAPE/CD/RADIO
selector 6 to TAPE.
CD PLAYER
Playing a disc
• Set TAPE/CD/RADIO selector 6 to CD.
The POWER, indicator 5 lights up.
• Press CD OPEN to open the disc cover.
• Insert the disc, printed side facing the window.
• Close the cover. The CD-player starts and the
number of tracks present on the disc appears
on the display 3 and the CD-player stops.
• Adjust the sound with the controls
VOLUME 4, and TONE 7.
• Playback will start by pressing
PLAY/PAUSE HI 8. As soon as playback
starts, the display shows the track number 1
(1 st title). When the 2 nd title is reached,
the track number 2 appears, etc.
• For brief interruptions, press PLAY/PAUSE Ml 8.
'PAUSE' lights up in the display:
To continue playback, press
PLAY/PAUSE HI 8 again.
• To stop playback, press STOP ■ 8.
The CD-player also goes to position STOP:
-If the CD-player reaches the end of the disc;
-If you press OPEN;
-If you move the TAPE/CD/RADIO selector 5;
- If the batteries get exhausted or if the power
supply is interrupted in another way.
• To take out the disc, open the disc cover by
pressing OPEN. Press OPEN only if the CD-
player is in position STOP.
• To switch off the set, place TAPE/CD/RADIO
selector 6 to TAPE.
Go to the next »i or previous h*< title
The SKIP and buttons 8 are operative
during PLAY.
SKIP »1 - go to the next track (title)
During playback, you can jump to the next title
by pressing SKIP 8 once. If you want to skip
more than one track, then press SKIP more
than once until the display 3 shows the desired
track number.
SKIP - go to the previous track (title)
During playback, you can jump to the previous
title by pressing SKIP r« 8 twice. If you-want to
skip more than one track, then press SKIP
more than once until the display 3 shows the
desired track number.
SEARCH (during PLAY)
• Keep SEARCH ►► (forward) or SEARCH ◄◄
(backward) pressed. The disc is then played
at high speed, however, the sound is still
recognizable.
•When releasing the button, the disc is played
in the normal way from this passage.
ra
c
UJ