Resume/hold, Operation – Philips AZ 7182/00 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
RESUME/HOLD
RESUME - playing from where you have stopped
1 Activate the RESUME feature by sliding the RESUME/HOLD
switch to the center setting.
2 If you stop CD play by pressing the STOP ■ button, the last
position played will be stored.
3 Press ►!! to resume CD play from the position it was
stopped at.
HOLD-deactivating all buttons
Activate the HOLD feature by sliding the RESUME/HOLD switch to the far right.
-► Now ali buttons are locked until you switch the feature off again. If you press a
button (except OPEN), the display will indicate HOLD.
Note: -In the HOLD position, the RESUME function is automaticaliy activated.
14