Centro 6500 User Manual

Page 22

2 0

Place the top lid and burner box assembly (A+B) onto the cart

assembly as shown.

Fix them by using hardware #6, #7, and #8 (x6) to the screw holes

as shown.

Assemble the upper brace (CJ) to the cart assemble which is

already finished from the last 3 steps by using hardware #6, #7,

and #8 (x4).

Fig. 4

Fig. 5

Open lid and position the 3 flame tamers (BL) above the 3 main

burners (BI & BJ). Place the 2 cooking grate (BN) into the burner

box to the left as shown. Place the “SEAR ZONE” cooking grate

(BO) above the infrared burner (BK).

Remember to cover the sear zone burner with cover (BJ)

while not in use. To avoid burner damage caused by damp

conditions, rain or snow.

Fig. 6