Philips CD 614 - Manual (Page 8)

PROGRAMMING
You can store 20 tracks from each CD in any required
sequence in a program. If you exceed the maximum
of 20 tracks, ERROR lights up.
STORING A PROGRAM
(NEXT, PREVIOUS and PROGRAM)_____________
• Close the CD compartment by pressing OPEN/
CLOSE.
- The display shows the number of tracks and the
playing time of the CD.
• Press NEXT or PREVIOUS until the first track
number you wish to program appears under
TRACK.
• Now press PROGRAM within 8 seconds.
- The playing time of the program will be shown
under TOTAL TIME (for 2 seconds).
- After the number a 'P'(for Program) will appear; the
number has now been stored in the player’s
memory.
• Select the other track numbers required and store
each track by pressing PROGRAM.
- The number indicator always shows which num­
bers have been stored.
ERASING A PROGRAM
(STOP/CM or OPEN/CLOSE)
• Press STOP/CM twice, or, if the CD has already
stopped, just once; you can also press OPEN/
CLOSE straight away.
- The program has now been erased.
ERASING A TRACK FROM A PROGRAM
(NEXT, PREVIOUS and PROGRAM)
• Press NEXT or PREVIOUS, before or after
programmed play (STOP mode), until the number
you wish to erase appears under TRACK.
• Press PROGRAM within 8 seconds.
- The number disappears from the display and from
the number indicator; it has now been erased.
STORING A PROGRAM USING SCAN
(SCAN and PROGRAM)_______________________
• Press SCAN before or during play.
- If the CD compartment was open, it will now close.
- ’—’ lights up and the first 10 seconds of each
track are played in turn.
• Press PROGRAM at each track you wish to include
in the program.
- The player Immediately starts to play the first 10
seconds of the next track.
• Press PLAY/REPLAY to play the program.
CHECKING THE PROGRAM (PROGRAM)________
• Press PROGRAM before, during or after program­
med play.
- REVIEW lights up and all the track numbers appear
in the programmed sequence on the display.
PLAYING THE PROGRAM (PLAY/REPLAY)
• Press PLAY/REPLAY.
- Play begins with the first number of the program.
All keys can be used during programmed play
(except EDIT).
Searching for a passage is limited to within the track
being played.