Philips CD 614 - Manual (Page 6)

OPERATION
17VOL(UME)
For adjusting the volume when listening with
headphones.
18 PROGRAM
- Storing tracks in a program.
- Erasing tracks from a program.
- Checking the program.
REMOTE CONTROL_________________________
- The life of the batteries of the remote control is
around one year; for replacement only use bat­
teries of the AAA type.
- O TRACK D = PREVIOUS and NEXT.
- <] SEARCH D = .
- Use the ’1-0’ digit keys, instead of PREVIOUS and
NEXT, for d/recf selection of:
the recording time when making a tape recording
(EDfD;
another track during play;
a track to start play with;
tracks when compiling a program.
Two-figure numbers must be entered within 2
seconds!
DISPLAY (Fig. 3)____________________________
’---------------- ’ - Lights up when you switch the player
RANDOM - Lights up when the tracks are played in
random order.
ERROR - Ughts up if you:
- make an error in operating the player;
- try to start play when the CD is inserted v/ith the
printed side facing down, is not inserted at all or Is
damaged.
(KO - Lights up when the player receives a command
from the remote control.
EDIT - Ughts up when the player is put in the EDfT
mode.
’—’ - Ughts up when the first 10 seconds of each
track are played (SCAN).
SWITCHING ON AND OFF (ON/OFF)____________
• Press ON/OFF to switch the player on.
• Press ON/OFF again to switch the player off.
PLAYBACK (PLAY/REPLAY)
on.
8
- Ughts up when a 8-cm CD is inserted.
12 - Ughts up when a 12-cm CD is inserted.
REVIEW - Ughts up v,/hen you check a program.
TRACK
- Indicates the track number being played.
- Shows how many tracks there are on the CD.
REPEAT - Ughts up when the entire CD ora program
is repeated.
A-B - Ughts up when a passage is repeated.
>
- Ughts during play.
- Rashes when play is interrupted (PAUSE).
TRACK TIME- Indicates the elapsed playing time of
the track being played.
REM TRACK TIME - Indicates the remaining playing
time of the track being played.
TOTAL REM TIME - Indicates the remaining playing
time of a disc or a program.
TOTAL TIME - Indicates the total playing time of a
disc or a program.
1-20 track number indicator - Shows the number of
tracks on the CD.
+20 - Ughts up when there are more than 20 tracks
on the CD.
• Open the CD compartment by pressing OPEN/
CLOSE.
• Insert a CD in the CD compartment, printed side
up (Fig. 4).
• Press PLAY/REPLAY.
- The CD compartment closes, !> and 8 or
12CS5 light up and a moment later playback
starts.
You can also close the CD compartment by
pressing its front; playback will then start automati­
cally.
- The track number indicator shows how many
tracks there are on the CD.
- The track being played is always shown under
TRACK and its elapsed playing time is shown
under TRACK TIME.
- Each time a track has been played, the corre­
sponding number goes out on the number in­
dicator.
- After the last track play stops.
- The display shows the number of tracks and the
playing time of the CD (TOTAL TIME).
CALLING UP OTHER TIME INFORMATION (TIME)
• Press TIME whenever you want to know the
remaining playing time of the track being played
(REM TRACK TIME).
• Press TIME again If you wish to know the remaining
playing time of the entire disc (TOTAL REM TIME).
• Press TIME again if you wish to return to the
elapsed playing time indication (TRACK TIME).