Tuner, Tuning to radio stations, Tuner -11 – Philips AZ1509-17 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TUNER
Tuning to radio stations
m
3
(O
1 Select the tuner by pressing the CD-TAPE-TUNER button
until inHia appears on the display.
2 Select the wave band by using the BAND selector.
Display indication: the seiected waveband.
3 Press TUNING or for approximately one second and then
release the button.
-►The radio automatically tunes to a station with sufficient
strength. Display indication during automatic tuning:
5 r c h
4 Repeat this procedure until you find a station you desire.
To tune to a weak station briefly press TUNING or as
often as necessary for optimum reception, or until the correct
frequency is indicated in the display.
Improving RADIO reception
For
FM
pull out the external antenna. To improve the signal, incline
and turn the antenna. Reduce its length if the signal is too strong
(very close to a transmitter).
For
AM,
direct the internal antenna by turning the whole set. The
external antenna is not needed.
S r c h
10