Philips 14PV182/39 - Manual (Page 4)

К-
Programming with 'VIDEOPIus+'
All the information required for programming is encoded in the 'VIDEOPIus+' code.
O Press the I sv/V4 | button on the remote control.
0 Enter the entire 'VIDEOPIust- code'. This code (up to 9 digits) is found next to the start time of a
TV programme in your TV guide.
If you entered an incorrect code number, clear it with the I ctEAREi Ihnttnn.
0 If you want to repeat programming at daily or weekly intervals, select the required settings in
the 'DAILY/WEEKLY' line.
'Daily' programming can only be used for recordings to be made from Mondays to Fridays
inclusive.
0 After confirming the corresponding data appears on the TV screen.
Note: If you use VIDEOPIus+forthe first time, the 'PROGRAMME NR.' line appears when you
enterthe VIDEOPIus+ code. Enterthe required programme number.
DATE DW PR START END S
01 01 17;1G 18:45
* V « » 0-9 OK
0 Confirm with the I I button.
The data has been stored in a TIMER block.
Please ensure that you loaded a cassette without erase protection.
0
Press the fSTANDBYOl hiittnn
How to enter, check or clear a TIMER-block manually______________
0
Press the ОШМЖ! button.
0
Select a free TIMER block or the TIMER block you want to check or clear.
0
niear Press the I CLEARa Ihlittnn.
0
Enter/Check: Press the Hor E button to switch between 'DATE' (date), 'DW' (daily,
weekly), 'PR' (programme number), 'START' (start time) and 'END' (end time).
Press the I A lend the I ▼ I nr the | 0-9 | buttons to change the data.
0
To end programming, press the I | button.
0
Press the I standbys
) button.
Selecting a TV channel
Select the required TV channel (= programme number) with the I I button or the I I
buttons on the remote control.
The selected programme number (e.g.: 'P 01') appears in the upper right corner of the TV screen.
Volume control
You can control the volume level with the I ^+/~ I button.
If you want to mute the sound temporarily (e.g.: during a telephone call), press the I mute ^^
button on the remote control. When you press it again, the sound returns at the same volume
level.
Picture control__________________________________________________
You can control brightness, contrast, sharpness and colour here.
0
Press the CZMMnZ] button.
0
Select and confirm the line 'PICTURE'.
0
Select and confirm the TV screen setting.
* In addition, you can adjust the tint for the playback of cassettes in the NTSC standard.