Philips CD 721 - Manual (Page 7)

PLAYBACK
NORMAL PLAYBACK (PLAY/REPLAY)
NOTE! Use only audio CDs; no CD-ROM, CD-1 or CDV.
• Press POWER ON/STANDBY 1 to switch the player on.
• Open the CD compartment by pressing OPEN/CLOSE 7.
- OPEN lights up.
• Insert an audio CD, printed side up, and close the compartment by pressing
OPEN/CLOSE 7.
CLOSE lights up, followed by READ. The number of tracks and the playing time of the CD
are shown on the display.
WACX TOTAt. tac
□ cr C u n
C.b _t: T U
I
4 S -9 7 4 9 1 9 4 1 4 2
• Press PLAY/REPLAY 6 to start play.
You can also press PLAY/REPLAY immediately after inserting the CD; the compartment
then closes automatically.
You can also close the CD compartment by pressing its front; playback will then start
automatically.
- The number indicator shows how many tracks are on the CD; when a track has been
played its number disappears.
1 2 3
4
5 6 7
•9 ‘10 'll
12
'7
-8 S
‘10 'll '12
The track being played is always shown under TRACK and its elapsed playing time is
shown under TRACK TIME.
3
SH5
S 4 7 4 9 t o < 1 4 2
- Play will stop after the last track.
• Press POWER ON/STANDBY 7 to switch the player off.
You can interrupt playback by pressing PAUSE 75; PAUSE then lights up.
Press PLAY/REPLAY 6to restart; if you first press PAUSE again and then PLAY/REPLAY,
the current track starts again from the beginning.
You can also restart play by pressing SCAN 16 (on the remote control - CD721 only) or
SHUFFLE 14.
If you press PLAY/REPLAY during play, the current track starts again from the beginning.
You can stop playback by pressing STOP/CP 5 or OPEN/CLOSE 7.