Philips AZ 6826 - Manual (Page 7)

POWER SUPPLY CONNECTIONS
MAINS ADAPTER SBC 6619
At home, you can use the mains adapter SBC 6619, deiivering
6 V/600 mA Direct Current, ^ -€)- O, plus-poie ^ to the centre
pin.
Whenever convenient, use the mains adapter if you want to
conserve battery life.
• First check that the mains voltage of the mains adapter cor-
responds to your local mains supply. If not, consult your dealer or service organi­
sation. If the adapter is equipped with a voltage selector, set this seiector to the
local mains voltage.
• Connect the mains adapter to the 6 V DC socket and the wall socket. Remove
the mains adapter from the wall socket when the CD player is not in use.
COIMNECTIONS______________________________________________
Headphone socket PHONES
• For headphones (or mini ioudspeakers) with 3.5 mm plug, see 'Accessories'.
REMOTE socket
• For a remote controi unit, see 'Accessories'.
CD OUT socket
• For CD reproduction at home through your stereo system
(amplifier, receiver, recorder, etc.). Use the signal lead SBC
1059 to connect the socket CD OUT to the input sockets LINE
IN, AUX or CD IN of the other set.
• Adjust the sound with the controls of the stereo system.
The VOLUME control and the DBB selector of the CD player
do not affect the output signal of the CD OUT socket.
OPTICAL DIGITAL OUT socket
• For CD reproduction through a high-quality stereo system with the same type
of optical socket. Use the signal lead SBC 1150 to connect the socket OPTICAL
DIGITAL OUT to the input socket OPTICAL DIGITAL IN of the other set.
• Adjust the sound with the controls of the stereo system.
The VOLUME control and the DBB selector of the CD player do not affect the
output signal of the OPTICAL DIGITAL OUT socket.