Power supply, Power adapter, Batteries, type lr6, um3, or aa – Philips AZ 7385 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
POWER SUPPLY
Power adapter
(supplied or optionally available)
AY 3160 power adapter, 4.5 V/400 mA direct current, positive pole to the center pin
1 Make sure that the local voltage corresponds
to the voltage of the adapter.
2 Connect the adapter to the player's
4.5 V DC socket and to the wall outlet.
Note: -Use only the AY 3160 adapter. Other
products may damage the set.
-No acoustic feedback is avaiiable when
using the adapter
-Aiways disconnect the adapter when you are not using it.
Batteries, type LR6, UM3, or AA
(supplied or optionally available)
Open the battery compartment and insert 2
alkaline batteries or the rechargeable battery
pack.
Typical playing times under normal conditions:
Alkaline batteries: 12 hours (ESA off)
10 hours (ESA on)
Remove batteries if they are dead or if the CD
player is not to be used for a long period of time.
Note: The battery condition wiil be indicated in the display:
-Full batteries: no indication.
-Weak batteries: s - symbol flashes. This symbol is not avaiiabie when
rechargeable batteries are used.
-Deadbatteries: c= -symbol flashes and the message appears.
-Replace the batteries or connect the power adapter.
Batteries
contain
chemical
substances.
Therefore,
they
should
be
disposed
of properly.