ISP Technologies HDL 3112 - Manual (Page 7)

The rear panel of the HDL 3112 also
has the AC power connections
allowing connection to AC power
with a Neutrik PowerCon inlet
connector. Under the Power input
is a Neutrik PowerCon outlet
connector, which allows connection
to one additional cabinet. It is not
recommended to connect more than
one additional cabinet to this
PowerCon outlet to reduce the
possibility of overloading a single
AC power circuit and also to avoid
excessive current required from a
single AC PowerCon inlet. This
panel also includes a panel mount
AC protection fuse.
KNOW THE RULES OF SAFE RIGGING
The system is designed to facilitate the
suspension of the HDL 3112 by a
qualified person familiar with rigging
hardware
and industry practices.
Improper installation may result in
damage, injury, or death!
The HDL 3112 can only be rigged using the
ISP Technologies HDL 3112 lightweight
ARRAY FRAME shown to the right. The HDL
3112 ARRAY FRAME can be used for both
flying applications and for ground stack
setups. When flown, only use 5/8” shackles
to attach to the steel links on the frame.