ISP Technologies VECTOR SL - Manual (Page 5)

VECTOR SL CABINET BACK PANEL CONNECTIONS
1. INPUT JACK
Connect the speaker output of your guitar amplifier to this input jack. The
VECTOR SL will internally attenuate the speaker output and apply this
signal to the input of the internal D-CAT amplifier to drive the subwoofer.
2. SUB LEVEL
The SUB LEVEL adjusts the output level of the VECTOR SL’s internal
subwoofer.
3. INPUT JACK
Connect the speaker output of your guitar amplifier to this input jack. The
VECTOR SL will internally attenuate the speaker output and apply this
signal to the input of the internal D-CAT amplifier to drive the subwoofer.
4. EXTERNAL SPEAKER JACK
Connect your external speaker to this output jack.
5. IMPEDANCE SELECTOR SWITCH
Set this switch to the proper impedance of your external speaker
cabinet(s). This will apply the correct crossover point for the system.
6. POWER INLET CONNECTOR
Connect the IEC AC power cord to this connector.