Interlogix TVD-5125TE-3 - Manual (Page 3)

3
Overview
This is the pocket guide for the TVD-5125TE-3-P /
TVD-5125TE-3-N IR Dome Camera. The guide
describes a standard installation.
The camera consists of the following:

Camera with power and video output cables
 Hex wrench
Refer to the figures in the front of the guide when
performing the camera setup procedures.
Installation
To install the camera:
1. Using the mount as a template, place it level
against the mounting surface and mark the
position of the mounting holes.
2. Following all local codes, drill and prepare the
mounting holes.
3. Securely fasten the mount to the mounting
surface with the appropriate fasteners.
4. If needed, seal all mounting holes so that no
moisture can leak into the mounting surface.