Combi 2680 - Manual (Page 7)

Using the Combi Connection Attachments
1. After removing the Kid’s Tray Guardrail attach the
Combi Connection Attachments by slipping them
over the armrest pins until you hear the plastic tabs
click into position. Gently pull up on attachment, to
be sure it is secure.
2. Attach Kid's Tray Guardrail and pull up on guardrail
to ensure it is secure.
ATTACHING THE COMBI CONNECTION ATTACHMENTS
4. Attach Combi Connection infant seat to attachments
and press down until seat locks in place.
- 7 -
3. Recline the backrest to the middle position. Pull the
Carrier Attachment Straps from behind the seat cushion
and lay them over the armrests.
5. Bring the Carrier Attachment Straps through the slots
in the infant car seat/carrier and fasten the buckle. (If
the strap is the incorrect length, adjust as needed. To
adjust, thread fabric through each side of the buckle.
Infant car seat MUST be secured to stroller. After instal-
lation, lift car seat to verify it is securely locked onto
stroller.