beautypg.com

Folding the stroller, Using and adjusting the 5-point harness warning, Using the seat extension – Combi 2680 User Manual

Page 5: Using the guardrail

background image

- 5 -

Folding the Stroller

1. Place the crotch belt between the baby's

legs.

2. Insert both waist belt buckles into the mid-

dle plastic piece.

3. Attach each shoulder

strap's hook to the top
of the waist belt clips.

4. To adjust the harness or

waist belt, loosen the
slack on both sides of
each buckle.

Using and Adjusting the 5-Point Harness

WARNING:

Avoid serious injury from
falling or sliding out.
Always use the 5-point
harness.

1. Fold the canopy by lifting the canopy

levers.

2. Remove your player from the back

pocket of the canopy.

3. Place seat in the upright position.
4. Hold the folding levers up on both sides

of the handle while completing step 5.

5. Tilt the stroller onto its back wheels and

roll forward. Then pull the handle back
quickly to fold front guardrail to
backrest.

6. Turn handle inward with an underhand

hold to latch and lock.

Fold
Release
Lever

Auto
Folding
Latch

Turn inward to fold.

Using the Seat Extension

1. Lift the seat cushion and locate the seat extension.
2. Pull out the seat extension.

When not in use, push the seat extension back to the
original position.

Seat extension

Using the Guardrail

1. Squeeze the guardrail

release buttons on both
sides to release the guard-
rail.

2. When one side is released,

the guardrail will pivot
to allow easy access to the
seating area.

3. When both sides are released the

guardrail can be removed.

4. To attach the guardrail slip it over

the armrest pins until you hear the
pins click into position.