Centro 2000 User Manual

Page 17

1 5

Insert grease tray left and right rail (CJ) & (CK) into the holes at the

inside of the cart assembly as shown. Insert the tank heat shield (CI)

into the holes in the upper rail.

Assemble the upper back panel (CL) to the back of the burner box by

using hardware #1, #3 and #4 (x4).

Then attach the upper back panel (CL) to the edge of left and right

grease tray rail as shown using hardware #6, #7 and #8 (x2).

Then fix the upper back panel (CL) together with the heat shield (CI) by

using hardware #9 (x2).

Assemble the left side shelf (DA) to the left side upper panel (BB) as

shown using hardware #2, #3 and #4 (x3) also using #6, #7 and #8

(x1), must go at the front side to fix the left side shelf (DA) and the

left side upper panel (BB).

Assemble the right side shelf (DB) to the right side upper panel (BC)

by using hardware #2, #3 and #4 (x3) also using #6, #7 and #8 (x1)

must go at the front to attach the right side shelf (DB) and right

side upper panel (BC). Insert the grease tray (CC) into the upper

brace (CH) as shown.

Fig. 8

Fig. 9

Fig. 7