Centro 2000 User Manual

Page 16

1 4

Open lid (A) and position the three flame tamers (BF) above the

burners (BD) as shown. Place the two cooking grates (BG) above

the flame tamers.

Assemble the upper brace (CH) below the control panel (CE) as

shown using hardware #6,#7 and #8 (x4).

Remove the screws and nuts from the top lid handle (AB), then

assemble the top lid handle (AB) to the top lid (AC) by using the

hardware which was just removed.

Fig. 4

Fig. 5

Attach the warming rack (BI) to the inside of the Burner Box as

shown. Make sure to insert the front 3 bars into the 3 holes of the

burner box rear panel (BH). Place the two legs of the warming rack

clip onto the edge of burner box weldment (BA).

Fig. 6