IC Realtime 1080P Full HD HDcctv/HD-SDI Box CCD Camera - Manual (Page 12)

24 25
8. Troubleshooting 9. Dimension(mm)
Problems Troubleshooting
Nothing appears on the screen.
· Please check that the power cord and line connection
between the camera and the monitor are fixed properly.
· Please check that you have properly connected VIDEO
cable to the VIDEO output jack of the camera.
The image on the screen is dim.
· Is lens stained with dirt? Clean your lens with soft, clean cloth.
· Set the monitor to proper condition.
· If the camera is exposed to too strong light, change
the camera position.
The image on the screen is dark.
· Adjust the contrast feature of the monitor.
· ,I\RXKDYHDQLQWHULPGHYLFHVHWWKHȍ+L]SURSHUO\
The camera is not working
properly, and the surface
of the camera is hot.
· Please check that you have properly connected the camera
to an appropriate power source.
Color is not correct. · Please check the setting of AWB menu .
The screen flickers continually. · Please check that direction of camera turns toward the Sun.
RS 485
communication fails.
· Please check the polarity between RS 485 Control Port
and RS 485 cable.
485 Control Board Connection Port RS 485 Control Port
(+)CONNECTION TERMINAL(TRX+) 485+
( )CONNECTION TERMINAL(TRX) 485
· Please check the RS 485 Communication establishment
initial value.
*RS 485 Communication establishment initial value
Item Camera ID BAUD RATE UART MODE RET PKT
Initial value 001 9600 8 NONE1 ENABLE
· We recommend that you make ground connect between camera
and controller in order to maintain safety communication control.