HONDA 2003 S2000 - Owner's Manual - Manual (Page 98)

The SEEK function
searches the band for a station with
a strong signal. To activate it, press
the SEEK bar
or , then
release it. Depending on which part
of the SEEK bar you press, the
system scans upward or downward
from the current frequency. It stops
when it finds a station with a strong
signal.
The ignition switch must be in
ACCESSORY (I) or ON (II) to
operate the audio system. Turn the
system on by pressing the PWR/
VOL knob or the AM/FM button.
Adjust the volume by turning the
knob.
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.
You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, AUTO
SELECT, and the preset buttons.
Use the TUNE knob to
tune the radio to a desired frequency.
Turn the TUNE knob to the right to
tune to a higher frequency, or to the
left to tune to a lower frequency.
Turn the knob right or left until the
display reaches the desired
frequency.
CONTINUED
Operating the Radio SEEK TUNE
Audio System
Comf ort and Convenience Features 95
Main Menu Table of Contents