HONDA 2003 S2000 - Owner's Manual - Manual (Page 166)

Always change the oil and filter
according to the time and distance
(miles/kilometers) recommenda-
tions in the maintenance schedule.
The oil and filter collect contami-
nants that can damage your engine if
they are not removed regularly.
Run the engine until it reaches
normal operating temperature,
then shut it off.
Remove the engine oil fill cap.
Remove the oil drain bolt from the
bottom of the engine. Drain the oil
into an appropriate container.
Install a new oil filter according to
instructions that come with it.
Changing the oil and filter requires
special tools and access from
underneath the car. The car should
be raised on a service station-type
hydraulic lift for this service. Unless
you have the knowledge and proper
equipment, you should have this
maintenance done by a skilled
mechanic.
Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your
Honda dealer) is required to
remove the filter.
1.
2. 3.
4.
CONTINUED
Changing the Oil and Filter
Engine Oil
Maintenance 163
WASHER OIL DRAIN BOLT OIL FILTER
Main Menu Table of Contents