beautypg.com

Lights – HONDA 2004 Civic Sedan - Owner's Manual User Manual

Page 159

background image

Remove the bulb from the socket
by pushing it in and turning the
bulb counterclockwise until it
unlocks.

Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.

Test the lights to make sure the
new bulb is working.

Put the inner fender cover in place.
Install the holding clip. Lock it in
place by pushing on the center.

Open the trunk.

Remove the screws in the center
of each of the two fasteners on the
side of the trunk lining. Pull the
lining back.

Determine which of the two bulbs
is burned out: stop/taillight/side
marker light or turn signal light.

Remove the socket by turning it
one-quarter turn counterclockwise.

Install the new bulb in the socket.
Turn it clockwise to lock it in place.

1.

2.

3.

4.

5.

6.

7.

8.

Lights

Maintenance

Replacing Rear Bulbs
(in Fenders)

156

FASTENERS

BULBS

SOCKETS

Main Menu

Table of Contents