HONDA 2004 Civic Sedan - Owner's Manual - Manual (Page 93)

The flow-through ventilation system
draws in outside air, circulates it
through the interior, then exhausts it
through vents near the rear side
panels.
Turn the temperature control dial
all the way to the left.
Make sure the A/C is off.
Select
and Fresh Air mode.
Set the fan to the desired speed.
Select and Fresh Air mode.
Set the fan to the desired speed.
Adjust the warmth of the air with
the temperature control dial.
Turn on the A/C by pressing the
button. The light in the button
comes on when a fan speed is
selected.
Make sure the temperature
control dial is all the way to the left.
Select
.
If the outside air is humid, select
Recirculation mode. If the outside
air is dry, select Fresh Air mode.
Set the fan to the desired speed.
you can
cool it down more rapidly by partially
opening the windows, turning on the
A/C, and setting the fan to
maximum speed in Fresh Air mode. Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
). If it moves near the red zone,
turn off the A/C until the gauge
reads normally.
The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming through the
system.
1.
2.
3.
4.
1.
2.
3.
4.
5.
1.
2.
3.
60
If the interior is very warm,
Vents, Heating, and A/C
Comf ort and Convenience Features
Ventilation
Using the Heater
Using the A/C
90
Main Menu Table of Contents