Instrument panel indicators – HONDA 2005 Insight - Owner's Manual User Manual

Page 46

This indicator has two functions:

If it remains lit after you fully
release the parking brake while
the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page

See page

It comes on when you turn the
ignition switch to ON (II). It is a
reminder to check the parking
brake. Driving with the parking
brake not fully released can
damage the brakes and tires.

The left or right turn signal indicator
blinks when you signal a lane change
or turn. If the indicator does not
blink or blinks rapidly, it usually
means one of the turn signal bulbs is
burned out (see page

). Replace

the bulb as soon as possible, since
other drivers cannot see that you are
signaling.

When you press the hazard warning
button, both turn signal indicators
blink. All turn signals on the outside
of the vehicle should flash.

This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II), and when
the ignition switch is turned to
START (III). If it comes on at any
other time, there is a problem with
the ABS. If this happens, have your
vehicle checked at a dealer. With
this indicator on, your vehicle still
has normal braking ability but no
anti-lock function. For more
information, see page

Instrument Panel Indicators

Parking Brake and Brake System
Indicator

Malf unction Indicator
Lamp

Turn Signal and Hazard Warning
Indicators

Anti-lock Brake System
(ABS) Indicator

Inst

nt
s

Cont