Instrument panel indicators – HONDA 2005 Insight - Owner's Manual User Manual
Page 45
The instrument panel has many
indicators to give you important
information about your vehicle.
The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running. For
more information, see page
.
If this indicator comes on when the
engine is running, the battery is not
being charged. For more information,
see page
.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II). If it comes
on at any other time, it indicates a
problem in the Integrated Motor
Assist (IMA) system. Have the
vehicle checked by the dealer as
soon as possible.
(Manual Transmission)
See pages
and
.
See page
.
(Automatic Transmission)
See page
.
This indicator comes on when you
turn the ignition switch to ON (II). It
reminds you and your passenger to
fasten your seat belts. A beeper also
sounds if you have not fastened your
seat belt.
If you continue driving without
fastening your seat belt, the beeper
sounds and the indicator flashes
again at regular intervals.
If you turn the ignition switch to ON
(II) before fastening your seat belt,
the beeper sounds and the indicator
flashes. If you do not fasten your
seat belt before the beeper stops, the
indicator stops flashing but remains
on.
This indicator comes on when you
turn the ignition switch to ON (II). If
it comes on at any other time, it
indicates a potential problem with
your front airbags or automatic seat
belt tensioners. For more
information, see page
.
Instrument Panel Indicators
Seat Belt Reminder
Indicator
Supplemental Restraint
System Indicator
Low Oil Pressure
Indicator
Charging System
Indicator
IMA System Indicator
Shif t Up/Shif t Down Indicators
Auto Idle Stop Indicator
Shif t Lever Position Indicators
44
Main Menu
Table of Contents