HONDA 2005 Accord Coupe - Owner's Manual User Manual

Page 40

Conventional child seats must be
secured to a vehicle with a seat belt,
whereas LATCH-compatible seats
are secured by attaching the seat to
hardware built into the two outer
seating positions in the back seat.

Since LATCH-compatible child seats
are easier to install and reduce the
possibility of improper installation,
we recommend selecting this style.

We also recommend selecting a
LATCH-compatible seat with a rigid,
rather than a flexible, anchor (see
page

If it is necessary to put a forward-
facing child seat in the front, move
the vehicle seat as far to the rear as
possible, be sure the child seat is
firmly secured to the vehicle, and the
child is properly strapped in the seat.

When buying a child seat, you need
to choose either a conventional child
seat, or one designed for use with
the Lower Anchors and Tethers for
Children (LATCH) system.

In seating positions and vehicles not
equipped with LATCH, a LATCH-
compatible child seat can be installed
using a seat belt.

Whatever type of seat you choose, to
provide proper protection, a child
seat should meet three
requirements:

Look for FMVSS

213 or CMVSS 213 on the box.

Rear-facing for infants, forward-
facing for small children.

Selecting a Child Seat

Protecting Infants and Small Children, Selecting a Child Seat

The child seat should meet U.S. or
Canadian Motor Vehicle Saf ety
Standard 213.

The child seat should be of the
proper type and size to f it the child.

Placing a forward-facing child
seat in the front seat can result
in serious injury or death if the
front airbag inflates.

If you must place a forward-
facing child seat in front, move
the vehicle seat as far back as
possible, and properly restrain
the child.

Main Menu

Table of Contents