Transmission fluid – HONDA 2005 Accord Coupe - Owner's Manual User Manual
Page 223
4-cylinder models
Check the fluid level with the engine
at normal operating temperature.
Park the vehicle on level ground.
Shut off the engine.
Remove the dipstick (yellow loop)
from the transmission, and wipe it
with a clean cloth.
Insert the dipstick all the way into
the transmission securely as
shown in the illustration.
Remove the dipstick and check
the fluid level. It should be
between the upper and lower
marks.
If the level is below the lower
mark, add fluid into the dipstick
tube to bring it to the upper mark.
Make sure the notch in the rubber
cap fits in the dipstick guide and
that you push the dipstick in all
the way.
Pour the fluid slowly and carefully
so you do not spill any. Clean up
any spills immediately; it could
damage components in the engine
compartment.
Always use Honda ATF-Z1
(Automatic Transmission Fluid). If
it’s not available, you may use a
DEXRON III automatic
transmission fluid as a temporary
replacement. However, continued
use can affect the shift quality.
Have the transmission flushed and
refilled with Honda ATF-Z1 as
soon as it is convenient.
1.
2.
3.
5.
4.
CONTINUED
Transmission Fluid
Automatic Transmission
Ma
int
e
na
nce
221
DIPSTICK
UPPER MARK
LOWER MARK
DIPSTICK
GUIDE
Main Menu
Table of Contents