HONDA 2007 Element - Owner's Manual - Manual (Page 204)

Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Place a cloth between the trim of
the lens and the body, at the top of
the lens. Remove the front side
marker light assembly by carefully
prying on the trim of the lens with
a small flat-tip screwdriver.
The front parking/turn signal light
is next to the headlight bulb. On
the driver’s side, remove the front
end of the air intake duct by
pulling it out (see page
).
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Test the lights to make sure the
new bulb is working.
Install the front end of the air
intake duct.
1. 2.
3.
1.
2.
3.
4.
5.
6.
198
(Driver’s side)
CONTINUED
On all models except SC
Lights
Replacing a Front Side Marker
Light Bulb
Ma
int
e
na
nce
201
SCREWDRIVER
CLOTH
LIGHT
ASSEMBLY
LIGHT ASSEMBLY
SOCKET
Main Menu Table of Contents