Tire pressure monitoring system (tpms), Programming dpms, What to do how it works – HONDA 2011 Odyssey (Touring, Touring Elite ) - Technology Reference Guide User Manual
Page 6
9
8
DRIVING POSITION MEMORY SYSTEM (DPMS)
Store a driver’s seat and mirror position into memory for each keyless remote.
Programming DPMS
Note: A stored memory position is linked to the corresponding keyless remote (1 or 2).
Each item begins to adjust when you unlock the driver’s door with the remote and enter
the vehicle.
1. Turn the ignition switch to ON (II).
Shift into Park (P).
2. Adjust the seat and outside mirrors
to your preferred settings.
3. Press and release the SET button
until you hear a beep.
4. Press and release the memory
button corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
What to Do
How It Works
TIRE PRESSURE MONITORING SYSTEM (TPMS)
Monitors the vehicle’s tire pressures.
Each tire valve stem contains
a TPMS sensor.
When the tire pressure drops
significantly below recommended
levels, the low tire pressure
indicator comes on and a message
appears on the MID.
1.Visually inspect the tires for
damage.
2. Use a tire air pressure gauge to
check which tire(s) have low
pressure.
3. Inflate the tire(s), if necessary,
to the recommended pressures
listed on the label on the
driver’s doorjamb.
11 Odyssey TRG_TOURING:ATG_NEW STYLE
7/30/2010
9:17 AM
Page 6