HONDA 2013 Insight - Owner's Manual - Manual (Page 67)

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and START (III) position.
When the brake system indicator
(amber) comes on and stays on,
there is a problem with the Creep
Aid System or Brake Assist (the
normal brake operates properly).
Have your vehicle checked by your
dealer. For more information, see
page .
You will also see a ‘‘CHECK BRAKE
SYSTEM’’ message on the multi-
information display (see
page ).
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If it comes on at any other
time, there is a problem with the
ABS. If this happens, have your
vehicle checked at a dealer. With
this indicator on, your vehicle still
has normal braking ability but no
anti-lock function. For more
information, see
page .
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. If it comes on at
any other time, it indicates a
potential problem with your front
airbags. This indicator will also alert
you to a potential problem with your
airbag system components. For
more information, see
page .
You will also see a ‘‘CHECK ABS
SYSTEM’’ message on the multi-
information display (see
page ).
You will also see a ‘‘CHECK
AIRBAG SYSTEM’’ message
on the multi-information display
(see
page ) .
89
89
34
89
285
287
Instrument Panel Indicators
Brake System
Indicator
(Amber) Anti-lock Brake System
(ABS) Indicator Supplemental Restraint
System Indicator
64
U.S. Canada
12/07/13 16:45:12 31TM8630_069
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
TOC
2013 Insight