beautypg.com

Installing a child seat with a lap/ shoulder belt, Installing a child seat – HONDA 2013 Insight - Owner's Manual User Manual

Page 52

background image

CONTINUED

With the child seat in the desired
seating position, route the belt
through the child seat according
to the seat maker’s instructions,
then insert the latch plate into the
buckle and remove any slack from
the lap portion of the belt.

When not using the LATCH system,
all child seats must be secured to the
vehicle with the lap part of a lap/
shoulder belt.

In addition, the lap/shoulder belts in
all seating positions except the
driver’s have a lockable retractor
that must be activated to secure a
child seat.

Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.

If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.

Push and pull the child seat
forward and from side-to-side to
verify that it is secure.

1.

6.

7.

Installing a Child Seat

Installing a Child Seat with a Lap/
Shoulder Belt

49

12/07/13 16:43:09 31TM8630_054

Dr
iv

er
and

P

asseng

er
Saf

e

ty

TOC

2013 Insight