HONDA 2015 Fit - Owner's Manual User Manual
Page 75
74
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
High Temperature
Indicator
(Red)
●
Comes on for a few seconds when you
turn the ignition switch to ON
(
w
*1
, then
goes off.
●
Blinks when the engine coolant
temperature goes up, and stays on if the
temperature continues to rise.
●
Goes off, then comes on blue when the engine
coolant temperature is low.
●
Blinks while driving - Drive slowly to prevent
overheating.
●
Stays on while driving - Immediately stop in a
safe place and allow the engine to cool.
Low Temperature
Indicator
(Blue)
●
Comes on when the engine coolant
temperature is low.
●
If the indicator stays on after the engine has reached
normal operating temperature, there may be a
problem with the temperature sensors. Have your
vehicle inspected by a dealer.
Vehicle Stability
Assist (VSA®) System
Indicator
●
Comes on for a few seconds when you
turn the ignition switch to ON
(
w
*1
, then
goes off.
●
Blinks when VSA® is active.
●
Comes on if there is a problem with the
VSA® system or hill start assist system.
●
Stays on constantly - Have your vehicle checked
by a dealer.
2 Vehicle Stability Assist (VSA®), aka Electronic
Stability Control (ESC), System P. 332
Vehicle Stability
Assist (VSA®) OFF
Indicator
●
Comes on for a few seconds when you
turn the ignition switch to ON
(
w
*1
, then
goes off.
●
Comes on when you deactivate VSA®.
2 VSA® OFF Button P. 333
15 US FIT-31T5A6000.book 74 ページ ２０１４年３月６日 木曜日 午後７時５分