Haltech HT070202 - Manual (Page 4)

Features
Hardware Features
• Combined Oscilloscope, Data Logger, Signal Generator, Spectrum Analyzer, Voltage
Meter and Frequency Meter functions
• 12-Bit ADC Resolution
• 12-Bit data streaming simultaneously on both channels
• 32k Byte Waveform buffer
• Sampling Rate
• Oscilloscope – 20MS/s (repetitive) , 1MS/s native
• Data logger – up to 50kS/s
• Maximum input voltage +/- 50V DC (35V RMS AC)
• AC/DC coupling
• Edge min / max, pulse width and delayed trigger modes
• Analog Bandwidth 250KHz
• Inbuilt 10-bit waveform generator with +/- 3.5V output range and 1k buffer
• Bus Powered USB Interface (250mA)
• Instrument carrying bag included
• Attractive enclosure with rubberized mouldings
• Dimensions – W: 116mm x H: 30mm x D: 100mm
• Weight: 160g (excluding cable)
Easy Scope II Software Features
• Timebase – 2us / div to 50ms / div in 14 steps
• Y-Scale 10mV / div to 5V / div
• On screen X and Y measurement cursors
• FFT Spectrum Analyser display on both channels
• Meter displays – Min, Max, Mean, True RMS Voltage and Frequency
• Save results to CSV file
• Save screen to BMP file
• Waveform generation – Sine, Square, Triangle, Sawtooth and user defined waveforms
Easy Logger Software Features
• Sampling Rate selectable from >100,000 samples / sec to 100 sec/sample
• Flexible Y-axis scaling (V, mV, User Defined)
• Flexible X-axis scaling (Sample Number or Time)
• Save to CSV, BMP. TXT or Binary files
• Up to 3 on-screen cursors to track data
• Up to 4 pop-up or email alerts
• Text memos for incorporating user notes in the data
Getting Started
The Haltech Stingray 2 Channel USB Oscilloscope requires device drivers to be
installed on your PC to enable communication with the instrument. Install the device
drivers prior to installing the applications below.
Driver Installation
The latest device drivers are available through the Microsoft Windows Update service.
Simply plug in the Haltech Stingray 2 Channel USB Oscilloscope via the USB Cable
provided in the kit. When the Found New Hardware wizard appears, allow it to find the
drivers from the windows update service. Windows 7 defaults to automatically download
the drivers without prompts.
The Haltech Stingray 2 Channel USB Oscilloscope utilizes a 2-Channel FTDI chip, so
the wizard will re-appear a second time to install the drivers for the second channel.
On completion of installation the device I ready to use.
Application Installation
Easy Scope II
The Easy Scope II application file is found on the software page on the Haltech
Resource CD, Click on the Easy Scope II software link to start the installation.
Follow the on screen prompts to install the application.
Easy Logger
The Easy Logger application file is found on the software page on the Haltech
Resource CD, Click on the Easy Logger software link to start the installation.
Follow the on screen prompts to install the application.
Once installed the applications can be accessed through the Windows start menu