Guardian Technologies LW9 - Manual (Page 4)

E-6 E-7
DIRECTIONS FOR USE
Insert Battery: Open the battery cover. Insert 4 AA Alkaline 1.
batteries into the battery compartment and close the cover.
UV-C Mini Sanitizer Wand is ready to work. (Fig. 1)
To Turn On: Press and hold the switch for 3 seconds.
2. The
LED indicator will start flashing. Once the flashing has
stopped, the UV-C Mini Sanitizer Wand is ready for use.
(Fig. 2)
Lower Voltage Warning: When battery voltage
3. reaches
down to 3.8V, UV-C Mini Sanitizer Wand will start beeping
for about 10 seconds. If no battery replacement is made
after the beep warning, unit will automatically turn off the
power. (Germicidal lamp and LED indicator light will turn
off).
To Turn Off: Simply press the switch once while UV-C
4.
Sanitizer Wand is still in operation. (Fig. 3)
Safety Switch: UV-C Mini Sanitizer Wand contains a
5. safety
switch. The safety switch protects users from direct
contact with the UV-C light. When the UV-C lamp is turned
to the upright position (bulb facing up) the switch will
automatically cut off the UV-C light. When the UV-C lamp is
pointing downwards it will resume lighting. (Fig. 4)
Battery Disposal
To preserve natural resources, please recycle or dispose of expired batteries
properly. This product MUST BE disposed of properly. Local, state or federal
laws may prohibit disposal of batteries in ordinary trash. Consult your local waste
authority for information regarding available recycling and/or disposal options.
Light Bulb Disposal
MERCURY NOTICE:
This device contains mercury in the sealed ultraviolet bulbs.
Do not place your used bulb(s) in the trash. Dispose of properly.
Broken Bulb Clean Up
Do not use a household vacuum. Sweep debris (phosphor/glass) into a plastic bag
and dispose of properly. It is recommended that the UV-C bulbs are recycled or
taken to a household-hazardous-waste collection center. Call the county
recycling center nearest you.
LIMITED WARRANTY
To the consumer, Guardian Technologies LLC warrants this product to be free of defects in
materials or workmanship commencing upon the date of original purchase. Refer to your
original sales receipt to validate start of warranty period.
If this product should become defective within the warranty period, we will repair or replace
any defective parts free of charge. The complete machine must be delivered pre-paid to any
authorized Guardian Technologies LLC warranty service center. Please include complete
information on the problem, date of purchase, copy of original sales receipt and your name,
address and telephone number. If you are not near a warranty service center, call the factory
for assistance in the US and Canada at 1.866.603.5900. Use only genuine Guardian
Technologies replacement parts.
The warranty does not include unusual wear, damage resulting from accident, or unreason-
able use of the product. This warranty does not cover light bulbs. This warranty does not cover
unauthorized repairs. This warranty gives you specific legal rights and you may also have
other rights (other rights may vary from state to state in the U.S.A.).
We consider the registration process important to ensuring superior service to our
customers, however submitting this card to Guardian Technologies LLC is optional and does
not affect your rights to utilize this warranty according to the conditions stated above. If you
have any questions or comments about our products call toll free at 1.866.603.5900 or send
comments to: ATTN: Customer Service
Guardian Technologies LLC
7700 St Clair Avenue
Mentor, Ohio 44060
2x
Fig. 1
Fig. 2
Fig. 3
Fig. 4