beautypg.com

Directions for use – Guardian Technologies H7560B User Manual

Page 5

background image

2. Auto Humidistat

Press the Auto button to activate the automatic humidity function, then the ideal humidity of

50% is maintained. When the humidity level in the room is less than the auto humidity level

(50%), the humidifier will continue to produce moisture automatically. Once the room level is

met, the humidifier will turn itself off.

3. Timer

Press the Timer button to determine the operating time, it can be regulated between 1 and 12

hours or for continuous operation.

%

4. Adjustable Humidistat

Set the desired humidity in % by pressing the Adjustable Humidistat button. We recommend a

relative humidity of between 40% and 50%. The appliance can be regulated from 40% to 75%

in 5% increments. If the humidity exceeds the desired setting, the appliance will turn itself off.

The appliance will not turn itself off if it has been set for Continuous Operation (“Co”). The

desired value is shown while you are making the selection. After a few seconds, the display

automatically switches to the current value. Note: If the room humidity is below 15% then the

display will flash.

DIRECTIONS FOR USE

CONTROL OpERATION

5. Mist Control

When you press the Mist Control button there are three options:

6. Low/No Water

When it is time to refill, the low water indicator will blink on the display.

DIRECTIONS FOR USE

CONTROL OpERATION

Press once for LOW.

Press twice for MEDIUM.

Press three times for HIGH

(no icons will be displayed

for this combination).

E-8

E-9

1. Cool/Warm Mist & Night Light Control

Turns night light on/off. Selects cool or warm mist. Water temperature is maintained at room

temperature for cool setting and 80 degrees for warm. Allow 15 minutes for water to warm.
Follow instructions for desired combination. The images show the screen

display for the combination of the cool/warm mist and night light settings.

Default: Night light/Warm mist

control on.

press 1 time: Night light OFF.

Warm mist ON.

press 2 times: Night light ON.

Cool mist ON.

press 3 times: Night light OFF.

Cool mist ON.

= Warm
= Night Light